How to maintain the wire rope chain hoist?

November 02, 2021

How to maintain the wire rope Electric chain hoist after use:

1. After each operation, firstly wipe the mud, dust or oil adhering to the loose end wire rope, loosen the jaws, pull out the wire rope, wrap the wire rope around the collecting frame, and wipe the full length wire rope to store the wire rope. Dry to prevent rust.

2. The Electric Hoist should be treated at least 4 times a year, such as using diesel to clean the parts and lubricate with calcium-based grease.

3. When the inside of the movement is filled with mud, cement or other dirt, it can be rinsed with clean water and then cleaned with diesel oil; after cleaning and drying, the calcium-based grease will be greased; finally, the jaws will be loosened and the net will be cleaned with a clean cotton yarn. Grease and moisture on the mouth.

4. When the jaws are worn and the bearing capacity is less than 80% of the rated load, the jaws should be replaced; when the diameter of the wire rope is reduced by 10%, the wire rope should be replaced.

Concerned about surprises

Label: How to maintain the wire rope chain hoist

Previous: Magnetic problems of stainless steel fasteners Next: How to distinguish the stamps of SKF bearings

The above is the How to maintain the wire rope chain hoist? we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Next:Wire rope electric hoist wire rope elasticity lower scrap standards